- Agriculture
- Horticulture
- Viticulture
- Organic Farming
- Hydroponics
- Sporting Venues
- Golf Courses
- Landscapes
- Nurseries
- Commercial
- Municipal
- Residential
- Environmental
- Enviro Building Systems
- Waste Water
- Desalination Systems
- Sewerage Systems
- Software
- Automation
- Telemetry
- Research & Development
- Equipment Sale
- Mailing List
WiSA Product Support Introduction
WiSA Environmental Soil & Water Management Systems control/monitor plant & soil moisture providing sustainable food supplies, housing, streetscapes, green city’s, roof gardens and many more applications.
Explanation of equipment.
The principles in the design of the equipment is to allow better use of water, more time to manage the farm other than irrigating night and day, and to help promote better healthier crops with higher quality and yields.
The system must be connected to a PC 24 hours per day 7 days per week to get the optimum data and utilization of the equipment. The system works in realtime that is, what is happening now not last week etc.
The WiSA system is unique and all design is based on Radio Telemetry and all integrated components are part of the design not an add – on.
Each of the modular design is a repeater in its own right, and two ranges are available in the radio transceiver, we operate on the unlicensed band of 151.300 MHz at 10 mw for ranges up to 4 km or 100 mw to further transmit in Australia.
As in all radio transmissions some areas will have problems for one reason or another and a site visit and test would be required before commencement of project and final pricing and choice of antennas to be utilized.
Because of the design in modules the farmer purchases only what is required to do the job at hand or we can specifically build to the farmers requirements.
Software is Aqualink and GroGraph.
Aqualink is the main unique control and communications software and is user friendly, mainly the use of the mouse is all that required after set up, GroGraph is the data, graphing and information storage where all information of when valves, pump, fertigation etc were open or closed are time date stamped and all information data is printable and automatically archived. You can even write your farm diary in this software!
Control Module 8
The control Module will operate 8 outputs which could be valves, lights, heaters, coolers, pumps, fertigation and anything that needs to be turned on or off as required. This module will run AC voltages continuos mode for valves or pump relays, DC voltage in latching mode for latching valves or relays or timed DC mode for the operation of DC motors for opening or closing bay doors, gates etc.
To this module we have SDI 12 for sensor input as standard and will receive data input from any SDI 12 Sensor – Soil moisture, weather etc. this is ahead of it time.
Input Module 9
Input module will receive data from a range of sensors, analogue, digital, SDI 12, RS 232, RS 485 and monibus this just means that it will read any sensor on these formats, it will read up to 9 sensors. Soil Moisture, Weather station sensors, pressure, flow, temperature etc. etc.
Hybrid 4/2
This module will receive data from 4 sensors and control 2 valves or 1 valve 1 pump, etc. etc.
Radio Power Head
This module contains the battery, solar panel, radio transceiver and antenna all mounted and complete read to wire into the required module, Control, Input 9 or Hybrid 4/2 or combination of units.
Base Station and PC interface
The PC interface module connected to your PC and the base radio is outside above your roof line and close to line of site of all other units. Base radio is connected to the Interface with a 4 core cable that supplies power and communications to the PC.
Use of flexible power
The flexible nature of design means that we can use solar power and battery or mains power to energize our system. This can save money if solar panel are not required etc. or if your existing system has 24 volt AC, it is simple for us to fit the bill.
A Management System you can work from anywhere in the world.
With the use of VNC you can connect to your property from anywhere in the world, check the soil moisture and alter scheduled irrigation events etc, basically operate your management system as if you where still on the property.
It will even call you if a fault occurs!
There is also a system dial out feature, to warn you of faults, that need your urgent attention.
WiSA Irrigation Solutions
A Division of Wrightcom Australia Pty, Ltd.
ACN 104 172 134
Design and Manufacture Technology for Water Use Efficiency
P.O. Box 592, Echuca Vic., Australia 3564
P/F + 61 3 54 837 757 Mobile: 0427 036 520
sales@irrigatewisa.com.au
A Division of Wrightcom Australia Pty, Ltd.
ACN 104 172 134
Design and Manufacture Technology for Water Use Efficiency
P.O. Box 592, Echuca Vic., Australia 3564
P/F + 61 3 54 837 757 Mobile: 0427 036 520
sales@irrigatewisa.com.au
